Home(Products) > MS6000 Outline of Operation
MS6000 Nano-Rework Station
Outline of Operation
MS6000 is manual rework system for chip size parts as 0402. The parts is supplied from the from the taping parts feeder and or individual parts feeder. The parts can be picked up by a vacuum bit which our original developed. And the parts can be positioning by the high magnificationCCD camera system. The tweezers can be rework of a high density mount board. It is possible of 0.1 mm or less of the gap between the parts. The solder paste supply is also by the optional dispenser which our original developed of the pen-cylinder type. It will be supply the solder paste of very small quantity and exactly. Furthermore, cleaning of the solder paste on the board is also possible,it is in the minute area as 0402.
![](../../../image/product/ms6000/controler2.jpg)
MS6000 has high magnification CCD camera system The camera system is for positioning of the parts and pick-up of the chip size parts. And it can be check of the solder printing, cleaning and out side view of the parts. They are 20--72 magnification maximum with zooming. and also with auto-focus. Top heating system is by halogen IR, and bottom heater is byhot air, They are our original developed high efficiency heating system. Thus, heat damage to the surrounding parts will be minimum.
![](../../../image/product/ms6000/panel.jpg)
>>Next Page
M.S.Engineering Co.,Ltd.
1-38-15, Okusawa, Setagaya-Ku, Tokyo, 158-0083 Japan. Phone: +81-3-4283-3951 Fax: +81-3-3728-5232
Copyright(C)2007 M.S.Engineering Co.,Ltd. All rights Reserved.